忍者ブログ
2025/04月
≪03月  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30  05月≫
[1] [2] [3] [4] [5] [6] [7] [8] [9
×

[PR]上記の広告は3ヶ月以上新規記事投稿のないブログに表示されています。新しい記事を書く事で広告が消えます。

JNCIS-SP資格認定を取得すると、ネットワーク プロフェッショナルとして認められます。
JN0-361認定試験だけ欲しいならPassexamのJNCIS-SP資格JN0-361問題集の丸暗記で取れると思います。
弊社のJNCIS-SP資格JN0-361学習材料はPDFとソフト版が含まれてます。
PDF版 いつでも、携帯電話、コンピュータ、タブレットPCで勉強してもいいです。
ソフト版は真実のJNCIS-SP資格JN0-361試験環境と同じです。受験者のために、試験環境を適応することができます。
受験者は電車内で広げ頑張って勉強することができます。
JNCIS-SP資格JN0-361受験体験記には、下記のとおりです
1.Passexamで一通り勉強した後は、やはり実機をさわった方がいいと思います。
2.Passexamで完璧にすることが良いです。
Passexamの模擬試験で確実に100%近く取れるようにしといたほうがいいですね。
もし、JNCIS-SP資格JN0-361試験材料を購入し、試験を受けましたが落ちて場合、アカウントに返金いたします。
弊社のJNCIS-SP資格JN0-361過去問を選択すると、1年で無料アップデートを提供しています。
JN0-361試験情報:
試験コード:JN0-361
筆記試験名称:サービス プロバイダ ルーティングおよびスイッチング、スペシャリスト(JNCIS-SP)
世界各地のピアソン VUE テスト センターで実施
試験の所要時間:90 分
試験形式:選択問題 65 問
合格/不合格ステータスは即時発表
前提となる認定資格:JNCIA-Junos
JNCIS-SP資格JN0-361筆記試験は、Junos でのルーティングとスイッチングの実装に関して初級から中級の知識を持つ、実務経験のあるネットワーク プロフェッショナル向けに設計されており、ルーティングおよびスイッチングの技術とそれに関連するプラットフォーム構成の基礎知識、トラブルシューティング スキルを受験者が身に付けていることを確認するものです。
JN0-361出題内容の詳細は以下のとおりです。
プロトコル非依存型ルーティング
オープン最短パス ファースト(OSPF)
中間システム - 中間システム(IS-IS)
境界ゲートウェイ プロトコル(BGP)
レイヤー 2 ブリッジングおよび VLAN
スパニング ツリー プロトコル
マルチプロトコル ラベル スイッチ(MPLS)
IPv6
トンネル
高可用性
弊社のJNCIS-SP資格JN0-361問題集を勉強したら、しっかり勉強すれば初心者でも合格できます。
弊社のJNCIS-SP資格JN0-361試験材料の使用だけやっていれば受けてもいいと思います。
弊社のJNCIS-SP資格JN0-361参考書がカバーする範囲から出題されます。
同じようなJNCIS-SP資格JN0-361問題が出題されるので、確認しておいたほうがいいと思います。
弊社のJNCIS-SP資格JN0-361勉強資料で1日ほど勉強すると、試験に合格できます。
弊社のJNCIS-SP資格JN0-361参考書について、1回全て読み通したあと、JN0-361問題と解答だけ解くことを1回繰り返します。
1.Because of recent network failures, additional circuits have been purchased. In addition, Fast reroute has been configured on critical MPLS LSPs.When the next failure occurs, which two time intervals will affect fast reroute? (Choose two.) 
A. The amount of time required to reroute the traffic onto the detour 
B. The amount of time to detect a link or node failure 
C. The amount of time required to recalculate the best detour 
D. The amount of time it takes to ping the gateway on the detour link 
Answer: A,B 
2.What must be configured for all IBGP speakers in an AS to have consistent routing information? 
A. Partial mesh of EBGP sessions between EBGP speakers 
B. Default routes to the IBGP gateways 
C. Static routes to the EBGP gateways 
D. Full mesh of IBGP sessions between IBGP speakers 
Answer: D 
3.You must configure an MX Series device to receive and forward a mixture of single-tag and dual-tag frames on interface xe-0/0/0. In this scenario what will accomplish goal? 
A. xe-0/0/0 {flexible-vlan-tagging;} 
B. xe-0/0/0 {stacked-vlan-tagging;} 
C. xe-0/0/0 {vlan-vci-tagging;} 
D. xe-0/0/0 {vlan-tagging;} 
Answer: A 
4.Which two statements are correct about default BGP route propagation? (Choose two.) 
A. IBGP speakers advertise IBGP-learned routes to other IBGP peers. 
B. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy. 
C. IBGP speakers advertise EBGP-learned routes to other IBGP peers. 
D. EBGP speakers advertise IBGP-learned routes to other EBGP peers. 
Answer: B,C 
5.You asked to deploy a large-scale IS-IS network with multiple areas.In this scenario, which two statements are true? (Choose two.) 
A. The area IDs must be the same for Level 2 routers to from an adjacency. 
B. Level1 routers can from an adjacency with any other Level 1 router. 
C. Level1 routers can from an adjacency with any other Level 2 router. 
D. The area IDs must be the same for Level1 routers to from an adjacency. Answer: B,D 
6.You want to save adjacency formation time between two routers participating in OSPF, as well as reduce the size of the OSPF link-state database.How would you accomplish these tasks? 
A. Configure a virtual link. 
B. Specify a designated router. 
C. Specify a backup designated router. 
D. Define a point-to-point connection. 
Answer: D 
7.Which two statements are true about VRRP? (Choose two.) 
A. VRRP requires redundant REs on each member. 
B. Interfaces within the same VRRP group do not have to be on the same subnet for each member. 
C. Interfaces within the same VRRP group must be on the same subnet for each member. 
D. VRRP does not require redundant REs on each member. 
Answer: C,D 
8.Which two fields of a hello packet must match on both routers when forming an OSPF adjacency? (Choose two.) 
A. Hello interval 
B. Designated route 
C. Router priority 
D. Network mask 
Answer: A,D 
9.You are establishing RSVP LSPs through your MPLS-enabled network. You are asked to ensure that the LSPs will support end-to-end class-of-service handling.Which statement is correct in this scenario? 
A. Configure ultimate-hop-popping on the egress device. 
B. Configure implicit-null on all MPLS-enabled devices. 
C. Configure explicit-null on all MPLS-enabled devices. 
D. Configure entropy-label on the egress device. 
Answer: C 
10.What are three label operations that an MPLS-enabled router performs? (Choose three.) 
A. swap 
B. push 
C. pop 
D. insert 
E. rewrite 
Answer: A,B,C
PR
CCNP Data Center認定300-165受験体験記、試験情報、学習方法及び無料サンプルが楽しく紹介されています。
受験者は300-165試験を受ける前にPassexamの300-165問題集を使って、きっとパスことができます。
1.Passexamに載っている問題(または類似問題)が多数出題されました。
2.Passexamさんの問題は良問なので、ひたすら繰り返せば問題なく合格できます
3.更新だけならPassexamで十分、取得なら参考書などもやった方がいいですね。
4.Passexamだけで充分という印象を受けました
5.Passexamを繰り返し解いて、90%以上正解できようになれば合格することは可能だと思います。
6.難易度はPassexamよりも問題が多かったでした。
試験情報:
CCNP Data Center 認定保有者は、デジタル ビジネス トランスフォーメーションを主導する上級役職者として高い評価を受けています。
300-165 Implementing Cisco Data Center Infrastructure(DCII)試験は、CCNP Data Center 認定に関連する試験の 1 つです。
CCNP Data Center認定300-165試験では、シスコのデータセンター インフラストラクチャの実装に関する知識が問われます。
CCNP Data Center認定300-165試験には、主要なプロトコル、ルーティングおよびスイッチングのプロトコル、メンテナンス、管理、運用、セキュリティ、ストレージが含まれます。
300-165認定試験がカバーする出題分野ならびに各分野の試験問題数に占める割合を以下に示します
1.0   データセンターのプロトコルの実装  29%     
2.0   ルーティングおよびスイッチングのプロトコルの実装  22%     
3.0   データセンター インフラストラクチャのメンテナンス、管理、運用  14%     
4.0   データセンター インフラストラクチャのセキュリティ  12%     
5.0   インフラストラクチャ ストレージ  23%    
学習方法:
弊社のCCNP Data Center認定300-165勉強資料は良いを持っており、迅速な試験内容を含まれることができます。
弊社のCCNP Data Center認定300-165参考書は本番の試験と同じ問題が出題されます。
最新のCCNP Data Center認定300-165勉強資料の丸暗記で取れると思います。
弊社のCCNP Data Center認定300-165問題集を使用したら、3日だけ、300-165試験内容を暗記してから、試験に合格することができます。
1.Topic 1, Data Center Infrastructure Maintenance, Management, and Operations 
Which statement about RADIUS configuration distribution using Cisco Fabric Services on a Cisco Nexus 7000 Series Switch is true? 
A. Cisco Fabric Services does not distribute the RADIUS server group configuration or server and global keys. 
B. Enabling Cisco Fabric Services causes the existing RADIUS configuration on your Cisco NX-OS device to be immediately distributed. 
C. When the RADIUS configuration is being simultaneously changed on more than one device in a Cisco Fabric Services region, the most recent changes will take precedence. 
D. Only the Cisco NX-OS device with the lowest IP address in the Cisco Fabric Services region can lock the RADIUS configuration. 
Answer: A 
2.By default it will take 10 seconds for authentication to fail due to an unresponsive RADIUS server before a Cisco Nexus series switch reverts to another RADIUS server or local authentication. What is one efficient way to improve the reaction time to a RADIUS server failure? 
A. Decrease the global RADIUS retransmission count to 1. 
B. Decrease the global RADIUS timeout interval to 5 seconds. 
C. Configure the RADIUS retransmission count and timeout interval per server, versus globally. 
D. Configure per server a test idle timer, along with a username and password. 
Answer: D
3.Which statement explains why a Cisco UCS 6200 Fabric Interconnect that is configured in end-host mode is beneficial to the unified fabric network? 
A. There is support for multiple (power of 2) uplinks. 
B. Upstream Layer 2 disjoint networks will remain separated. 
C. The 6200 can connect directly via vPC to a Layer 3 aggregation device. 
D. STP is not required on the uplink ports from the 6200. 
Answer: D 
4.Which two statements about Cisco Nexus 7000 line cards are true? (Choose two.) 
A. M1, M2, and F1 cards are allowed in the same VDC. 
B. M line cards are service-oriented and likely face the access layer and provide Layer 2 connectivity. 
C. F line cards are performance-oriented and likely connect northbound to the core layer for Layer 3 connectivity. 
D. M line cards support Layer 2, Layer 3, and Layer 4 with large forwarding tables and a rich feature set. 
E. The F2 line card must reside in the admin VDC. 
Answer: A, D 
5.Which statement about the Layer 3 card on the Cisco Nexus 5500 Series Switch is true? 
A. BGP support is not provided, but RIP, EIGRP, and OSPF support is provided. 
B. Up to two 4-port cards are supported with up to 160 Gb/s of Layer 3 forwarding capability. 
C. Up to 16 FEX connections are supported. 
D. Port channels cannot be configured as Layer 3 interfaces. 
Answer: C 
6.Which statement about SNMP support on Cisco Nexus switches is true? 
A. Cisco NX-OS only supports SNMP over IPv4. 
B. Cisco NX-OS supports one instance of the SNMP per VDC. 
C. SNMP is not VRF-aware. 
D. SNMP requires the LAN_ENTERPRISE_SERVICES_PKG license. 
E. Only users belonging to the network operator RBAC role can assign SNMP groups. 
Answer: B 
7.Which GLBP load-balancing algorithm ensures that a client is always mapped to the same VMAC address? 
A. vmac-weighted 
B. dedicated-vmac-mode 
C. shortest-path and weighting 
D. host-dependent 
Answer: D 
8.Which three items must be configured in the port profile client in Cisco UCS Manager? (Choose three.) 
A. port profile 
B. DVS 
C. data center 
D. folder 
E. vCenter IP address 
F. VM port group 
Answer: B, C, D 
9.Refer to the command below. When configuring an SVS connection on the Cisco Nexus 5000 Series Switch, which device is being referenced as the remote IP address? 
nexus5500-2(config-svs-conn)# remote ip address 10.10.1.15 port 80 vrf management 
A. ESX or ESXi host 
B. vCenter 
C. vPC peer switch 
D. Cisco IMC management 
Answer: B 
10.On a Cisco Nexus 7000 Series router, which statement about HSRP and VRRP is true? 
A. When VDCs are in use, only VRRP is supported. 
B. HSRP and VRRP both use the same multicast IP address with different port numbers. 
C. HSRP has shorter default hold and hello times. 
D. The VRRP group IP address can be the same as the router-specific IP address. 
Answer: D 
11.Which protocol is the foundation for unified fabric as implemented in Cisco NX-OS? 
A. Fibre Channel 
B. Data Center Bridging 
C. Fibre Channel over Ethernet 
D. N proxy virtualization 
E. N Port identifier virtualization 
Answer: C 
12.Which statement is true if password-strength checking is enabled? 
A. Short, easy-to-decipher passwords will be rejected. 
B. The strength of existing passwords will be checked. 
C. Special characters, such as the dollar sign ($) or the percent sign (%), will not be allowed. 
D. Passwords become case-sensitive. 
Answer: A 
EXINアジャイルスクラムファンデーション試験はプロフェッショナルがアジャイル手法とスクラム実践の組み合わされた知識を持っていることを証明します。
初心者は独学でEX0-008を勉強したら、PassexamのEXIN Agile Scrum Foundation資格EX0-008問題集の使用だけで合格は可能だと思います。
PassexamのEXIN Agile Scrum Foundation資格EX0-008問題集の正解率が9割を超えるまで繰り返し、試験に合格することができます。
弊社のEXIN Agile Scrum Foundation資格EX0-008参考書の内容理解して、問題を丁寧に解いていけば、だれでも合格できる資格だと思います。
弊社のEXIN Agile Scrum Foundation資格EX0-008勉強資料を一度ちゃんと学習しておけば合格レベルに到達すると思います。
EX0-008受験体験記には、下記のとおりです
Passexam範囲を確実にすることで合格には充分と思います。
弊社のEXIN Agile Scrum Foundation資格EX0-008テキストをしっかり読んで理解すれば大丈夫です。
弊社のEXIN Agile Scrum Foundation資格EX0-008参考書は学習には役立ちますが、90%以上を得点できるようになれば、受験して良いと思います。
EX0-008試験要件:
アジャイルとスクラムの導入
スクラム実践
スクラム計画
スクラムプロジェクトのモニタ
高度なスクラム概念
 
EX0-008試験詳細:
試験形式:多肢選択式
設問数:40
合格のための正答率:65% (26 of 40)
本の持込: no
電子機器の持ち込み:no
アジャイル開発はソフトウェア開発におけるよく知られたアプローチであり、次第に他の分野でも使われるようになってきました。
スクラム実践は、クロスファンクショナルで自主管理されたチームの形成、各反復(イテレーション)またはスプリントの終わりに実際に使える成果物を製造することを含みます。
EX0-008認定は特に、次の分野で働くプロフェッショナルに適しています。
プロジェクトマネジメント
ソフトウェア開発
ITサービスマネジメント
ビジネスマネジメント
弊社のEXIN Agile Scrum Foundation資格EX0-008試験資料を勉強したら、試験に合格するために、一年間の無料更新サービスを提供します。
弊社のEXIN Agile Scrum Foundation資格EX0-008受験対策を勉強したら、あなたが時間と試験の経済的コストを削減することができます。
非常に有効で適切なEXIN Agile Scrum Foundation資格EX0-008学習材料を提供することができます。
最新のEXIN Agile Scrum Foundation資格EX0-008練習問題集が結構出題されます。
受験者はEX0-008受験対象を購入する前に、無料でEX0-008サンプルを提供することができます。
1.Sprint planning should result in a commitment on what will be delivered at the end of the Sprint. Who 
makes this commitment? 
A. The Product Owner 
B. The Scrum Master 
C. The team 
Answer: C 
2.A team is estimating story points. They estimate that the story falls between a large (13) and a medium 
(5) and they assign a story point of 8. 
What is this technique called? 
A. Affinity estimation 
B. Fibonacci estimation 
C. Triangulation 
Answer: C 
3.Which Scrum ritual is meant to look back and improve upon the finished Sprint? 
A. Daily Scrum. 
B. Sprint Retrospective. 
C. Sprint Review. 
Answer: B 
4.What is meant by the velocity of the team? 
A. The rate a team puts in a normal work day. 
B. The rate at which features are released to the customer. 
C. The rate at which the team completes the work. 
D. The rate at which the team renews itself. 
Answer: C 
5.What is a Sprint? 
A. A brainstorming session in Extreme programming to generate design ideas. 
B. A race between two developers to see who can complete a feature fastest. 
C. One iteration in the Scrum methodology. 
D. The last iteration in the Scrum project, when the team works long hours to finish the project. 
Answer: C 
6.What is the primary responsibility of a Scrum Master in order to keep a Scrum team working at its peak 
level of productivity? 
A. Keeping high priority features at the top of the Product Backlog. 
B. Not allowing changes to the Product Backlog once the Sprint begins. 
C. Supporting the team's decisions and resolving the team's issues. 
Answer: C 
7.A customer requests a report that summarizes functionality added and defects found and fixed, right at 
the end of a Sprint. Who may best prepare this report? 
A. The Product Owner 
B. The Scrum Master 
C. The team 
D. This type of report should not be prepared. 
Answer: B 
8.Who should update the work estimates during the Sprint? 
A. Only the team members 
B. The Project Manager 
C. The Product Owner 
Answer: A 
9.Which means of communication is the most preferable to clarify the interpretation of a requirement? 
A. E-mail 
B. Face-to-face 
C. Instant messaging 
D. Telephone 
Answer: B 
10.In a Scrum project, when would a requirement get added to the Product backlog? 
A. When it is developed, but cannot yet be released. 
B. When the team works on it for a particular release. 
C. When the customer requests a new requirement. 
Answer: C 
独学で、EMCIE XtremIO Solutions認定E20-368試験に合格したら、Passexamを使用してください。
Passexamは9割ぐらいEMCIE XtremIO Solutions認定E20-368問題集を提供します。
弊社のEMCIE XtremIO Solutions認定E20-368勉強資料の使用は試験の合格に必要な知識を習得することができます。
弊社のEMCIE XtremIO Solutions認定E20-368受験対策を繰り返し解き90%以上正解できます。
実際の試験で95%の類似性を有する高品質のEMCIE XtremIO Solutions認定E20-368受験対策を持っています
EMCIE XtremIO Solutions認定E20-368受験体験記には、下記のとおりです
Passexamだけでも十分合格点に達することができると思う。
受験者は弊社のEMCIE XtremIO Solutions認定E20-368学習資料の参考に使用してから、出題内容を習得することができます。
弊社のEMCIE XtremIO Solutions認定E20-368勉強材料を購入するときには、一年で無料アップデートを取得します。
もし、EMCIE XtremIO Solutions認定E20-368試験材料を使用してから、不合格の場合、弊社で購入したお金を返金します。
E20-368試験情報:
「インプリメンテーション エンジニア向けXtremIO ソリューション スペシャリスト試験」試験 (E20-368) は、制限時間 90 分、出題数 約60問のEMCIE XtremIO Solutions認定に関連する試験です。
E20-368試験はテクノロジー アーキテクト向け XtremIO ソリューションとデザイン スペシャリスト バージョン 1.0 (EMCIE)資格認定試験です。
EMCIE XtremIO Solutions認定E20-368試験は、異種混在オープン システムと仮想環境でXtremIOストレージ システムの導入に関する知識とアクティビティに重点を置いています。 
EMCIE XtremIO Solutions認定E20-368試験ではクラスタのインスール、初期構成、実装、ストレージへのホストのアクセス、ローカル レプリケーションの実装、パフォーマンスの監視と最適化、基本的なトラブルシューティングが含まれます。
最新のEMCIE XtremIO Solutions認定E20-368問題集での学習においても正確な暗記を心がける必要があると思います。
弊社のEMCIE XtremIO Solutions認定E20-368勉強資料を一通り勉強したら、きっと試験に合格することができます。
弊社のEMCIE XtremIO Solutions認定E20-368勉強資料の問題だけでは合格できます。
E20-368試験の出題範囲となる内容は次のとおりです。
XtremIOの基礎 
? メリットと使用例
? システム アーキテクチャ、特長、機能
? 管理オプション
XtremIOハードウェアの基礎 
? ハードウェア コンポーネントとクラスタ構成 
? 入力電源要件、 レセプタクル
 
XtremIOのインストール 
? インストールのためのサイトの準備と要件
? ラック設置、ケーブル接続、電源投入の手順 
? 基本ネットワーク構成、電源投入の手順
XtremIOの初期構成 
? Management Server(XMS)の構成
? クラスタ初期化の手順 
? ESRSの構成
XtremIOの管理およびパフォーマンス監視 
? XMSの操作
? XtremIOクラスタの監視と管理
? ホストへのストレージ プロビジョニング
? スナップショット、暗号化、重複排除
? クラスタの監視、アラート、レポート
? パフォーマンスの監視、管理
? 基本的なトラブルシューティング、可用性
弊社のEMCIE XtremIO Solutions認定E20-368勉強材料を使えば1週間で合格できたと思いますが、あえて時間をかけて勉強することができます。
弊社のEMCIE XtremIO Solutions認定E20-368問題集を利用した学習の方がより短時間で高得点を目指せると思います。
短期集中で勉強すれば、弊社のEMCIE XtremIO Solutions認定E20-368参考書で1~2週間で十分だと思います。
弊社のEMCIE XtremIO Solutions認定E20-368学習材料を使用すると、常に高いレベルに到達するための独自の知識を向上させています。
EMCIE XtremIO Solutions認定E20-368問題と答えを暗記しただけで、初心者としても10~20時間の独学で、時間が節約します。
1.Which key component within EMC XtremIO uses a proprietary algorithm dedicated to fast rebuilds of 
data? 
A. XDP 
B. D@RE 
C. RAID-DP 
D. eMLC 
Answer: A 
2.Which key components within EMC XtremIO provide an enterprise grade of high availability? 
A. Data-at-Rest Encryption and Snapshots 
B. XtremIO Data Protection and Snapshots 
C. Thin provisioning and Data-at-Rest Encryption 
D. In-line Data Deduplication and Compression 
Answer: B
 
3.A company is running large databases demanding many copies of production databases on-demand 
with massive consolidation of dev/test application workloads. 
They are looking for a solution that addresses their specific needs without high storage costs or a larger 
storage footprint. 
Which EMC XtremIO features address their needs? 
A. Inline Deduplication and compression 
B. High IOPS and ease of use 
C. Ease of use and efficiency 
D. Low latency and data protection 
Answer: A 
4.What is used to distribute the data between X-Bricks in a 4 X-Brick cluster? 
A. InfiniBand 
B. iSCSI 
C. FC 
D. FCoE 
Answer: A
 
5.Which protocols are supported by XtremIO for host connectivity? 
A. FC and iSCSI 
B. NFS and FC 
C. iSCSI and FCoE 
D. FCoE 
Answer: A 
AWS-Solutions-Architect-Professionalの独学の場合、教材さえあれば、いつでもどこでも勉強してもいいでしょうか?
AWS-Solutions-Architect-Professional試験合格するだけならPassexamのAmazon Solutions-Architect認定AWS-Solutions-Architect-Professional問題集あたりを丸暗記すれば大丈夫です。
PassexamのAmazon Solutions-Architect認定AWS-Solutions-Architect-Professional勉強資料の丸暗記で取れると思います。
弊社のAmazon Solutions-Architect認定AWS-Solutions-Architect-Professional問題集の正答率90%以上の程度で1回目の受験したら、試験に合格することができます。
受験者が持っているAmazon Solutions-Architect認定AWS-Solutions-Architect-Professional試験資料は最新版であることを保証できます。
AWS-Solutions-Architect-Professional受験体験記には、下記のとおりです
1.更新だけならPassexamで十分、取得なら参考書などもやった方がいいですね。
2.難易度はPassexamよりも問題が多かったでした。
弊社のAmazon Solutions-Architect認定AWS-Solutions-Architect-Professional勉強資料はPDF版とソフト版を提供しますので、どこでも勉強してもいいです。
弊社のAmazon Solutions-Architect認定AWS-Solutions-Architect-Professional学習教材を選んだら、受験者はもっと充分の時間で試験に準備できるように、一年間の無料更新サービスを提供します。
もし、Amazon Solutions-Architect認定AWS-Solutions-Architect-Professional学習教材は問題があれば、或いは試験に不合格になる場合は、全額返金することを保証いたします。
AWS 認定ソリューションアーキテクト – プロフェッショナル試験は、AWS プラットフォームでの分散アプリケーションとシステムの設計における高度な技術スキルおよび経験を認定します。たとえば、この試験では次の点を理解していることが求められます。
AWS でのアプリケーションの動的なスケーラビリティ、高可用性、高耐障害性および信頼性の設計およびデプロイ
与えられた要件に基づいてアプリケーションを設計およびデプロイするための、適切な AWS サービスの選択
AWS における複雑かつ多階層のアプリケーションの移行
AWS におけるエンタープライズ全体のスケーラブルな運用の設計およびデプロイ
コストコントロール戦略の導入
AWS-Solutions-Architect-Professional試験の受験対象者には以下が求められます。
AWS 認定ソリューションアーキテクト – アソシエイトの取得 
AWS でのクラウドアーキテクチャの設計およびデプロイに関する 2 年以上の実際の経験。
AWS でのクラウドアプリケーションの要件を評価し、アプリケーションの導入、デプロイおよびプロビジョニングについてアーキテクチャに関する推奨を行う能力。 
複数のアプリケーション、プロジェクトまたはエンタープライズ全体でのアーキテクチャの設計においてベストプラクティスのガイダンスを提供する能力。
高いカバー率のAmazon Solutions-Architect認定AWS-Solutions-Architect-Professional学習資料として、真実の試験と同じの出題内容で、受験者は気楽に試験に合格することができます。
弊社のAmazon Solutions-Architect認定AWS-Solutions-Architect-Professional勉強資料が暗記してた問題の応用問題は役に立ちます。
弊社のAmazon Solutions-Architect認定AWS-Solutions-Architect-Professional試験資料を選択した場合は、知識を統合するために時間とエネルギーを大幅に節約することができます。
AWS-Solutions-Architect-Professional試験の概要:
必要な前提条件: AWS 認定ソリューションアーキテクト – アソシエイトの認定
複数の選択肢と複数の答えがある問題
試験時間: 170 分間
試験は英語でご利用いただけます日本語でもご利用いただけます。
10月1日より模擬試験受験料: 4,320 円(日本語版/税込)
2015年税制改正に伴い、2015年10月1日以降に実施する日本国外から配信されております模擬試験について、消費税を請求させて頂きます。
本試験受験料:32,400 円 (日本語版/税込)
弊社のAWS-Solutions-Architect-Professional試験内容をきちんと暗記できれば、合格できます。
買う前に、AWS-Solutions-Architect-Professional無料サンプルでダウンロードできます。
1.By default, Amazon Cognito maintains the last-written version of the data. You can override this 
behavior and resolve data conflicts programmatically. 
In addition, push synchronization allows you to use Amazon Cognito to send a silent ________ 
notification to all devices associated with an identity to notify them that new data is available. 
A. get 
B. post 
C. pull 
D. push 
Answer: D 
Explanation:
By default, Amazon Cognito maintains the last-written version of the data. You can override this behavior 
and resolve data conflicts programmatically. In addition, push synchronization allows you to use Amazon 
Cognito to send a silent push notification to all devices associated with an identity to notify them that new 
data is available. 
Reference: http://aws.amazon.com/cognito/faqs/ 
2.You want to use AWS CodeDeploy to deploy an application to Amazon EC2 instances running within an 
Amazon Virtual Private Cloud (VPC). 
What criterion must be met for this to be possible? 
A. The AWS CodeDeploy agent installed on the Amazon EC2 instances must be able to access only the 
public AWS CodeDeploy endpoint. 
B. The AWS CodeDeploy agent installed on the Amazon EC2 instances must be able to access only the 
public Amazon S3 service endpoint. 
C. The AWS CodeDeploy agent installed on the Amazon EC2 instances must be able to access the public 
AWS CodeDeploy and Amazon S3 service endpoints. 
D. It is not currently possible to use AWS CodeDeploy to deploy an application to Amazon EC2 instances 
running within an Amazon Virtual Private Cloud (VPC.) 
Answer: C 
Explanation:
You can use AWS CodeDeploy to deploy an application to Amazon EC2 instances running within an 
Amazon Virtual Private Cloud (VPC). However, the AWS CodeDeploy agent installed on the Amazon EC2 
instances must be able to access the public AWS CodeDeploy and Amazon S3 service endpoints. 
Reference: http://aws.amazon.com/codedeploy/faqs/ 
3.An IAM user is trying to perform an action on an object belonging to some other root account’s bucket. 
Which of the below mentioned options will AWS S3 not verify? 
A. The object owner has provided access to the IAM user 
B. Permission provided by the parent of the IAM user on the bucket 
C. Permission provided by the bucket owner to the IAM user 
D. Permission provided by the parent of the IAM user 
Answer: B 
Explanation:
If the IAM user is trying to perform some action on the object belonging to another AWS user’s bucket, S3 
will verify whether the owner of the IAM user has given sufficient permission to him. It also verifies the policy for the bucket as well as the policy defined by the object owner. 
Reference: 
http://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-auth-workflow-object-operation.html 
4.An organization is planning to extend their data center by connecting their DC with the AWS VPC using 
the VPN gateway. The organization is setting up a dynamically routed VPN connection. 
Which of the below mentioned answers is not required to setup this configuration? 
A. The type of customer gateway, such as Cisco ASA, Juniper J-Series, Juniper SSG, Yamaha. 
B. Elastic IP ranges that the organization wants to advertise over the VPN connection to the VPC. 
C. Internet-routable IP address (static) of the customer gateway's external interface. 
D. Border Gateway Protocol (BGP) Autonomous System Number (ASN) of the customer gateway. 
Answer: B 
Explanation:
The Amazon Virtual Private Cloud (Amazon VPC) allows the user to define a virtual networking 
environment in a private, isolated section of the Amazon Web Services (AWS) cloud. The user has 
complete control over the virtual networking environment. The organization wants to extend their network 
into the cloud and also directly access the internet from their AWS VPC. Thus, the organization should 
setup a Virtual Private Cloud (VPC) with a public subnet and a private subnet, and a virtual private 
gateway to enable communication with their data center network over an IPsec VPN tunnel. To setup this 
configuration the organization needs to use the Amazon VPC with a VPN connection. The organization 
network administrator must designate a physical appliance as a customer gateway and configure it. The 
organization would need the below mentioned information to setup this configuration: 
The type of customer gateway, such as Cisco ASA, Juniper J-Series, Juniper SSG, Yamaha 
Internet-routable IP address (static) of the customer gateway's external interface 
Border Gateway Protocol (BGP) Autonomous System Number (ASN) of the customer gateway, if the 
organization is creating a dynamically routed VPN connection. 
Internal network IP ranges that the user wants to advertise over the VPN connection to the VPC. 
Reference: http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_VPN.html 
5.In the context of AWS IAM, identify a true statement about user passwords (login profiles). 
A. They must contain Unicode characters. 
B. They can contain any Basic Latin (ASCII) characters. 
C. They must begin and end with a forward slash (/). 
D. They cannot contain Basic Latin (ASCII) characters. 
Answer: B 
Explanation:
The user passwords (login profiles) of IAM users can contain any Basic Latin (ASCII) characters. 
Reference: http://docs.aws.amazon.com/IAM/latest/UserGuide/LimitationsOnEntities.html 
プロフィール
HN:
No Name Ninja
性別:
非公開
P R

Powered by Ninja Blog    template by Temp* factory    materiai by Sweety

忍者ブログ [PR]